11gge x 26" Supr-Loop Springs

SPRSI7497

Specifications

Specifications

Product Name11gge x 26" Supr-Loop Springs
Part NumberSPRSI7497
Product Description11gge x 26" Supr-Loop Springs is the ultimate upholstery spring for your couch or sofa requirements.
CatalogueThis Product is on Page 270 of the J. Ennis Supply Catalogue 5th Edition, This Product is on Page 223 of the J. Ennis Supply Catalogue 4th Edition
CollectionSupply Catalogue 5th Ed
ContentSteel
FeaturesSinuous springs, also known as sagless or zig-zag, are the most common low profile springs. Although the shape might lead you to think otherwise, they do depend on compression for the spring effect. A solid and sturdy frame is required to bear the stresses, from the front to back rail and top to bottom rail pull of these springs (occasionally reinforcing is required), Maximum resiliency is obtained when a convex spring arc height is between 2 and 2 1/4 inches. This is the 'rise' of the spring over the frame mounting point. If you wish to add height to an existing spring, use a hinge link at the back of the frame. Spring ends should be cut so that both ends face the same direction. When measuring to cut, if the desired length means the ends would face opposite, go to the next longer, not shorter, bend., High tensile strength wire springs in 11 gauge seating stiffness, cut into 18 to 37 inch lengths and ready to use., Once cut mount the springs with the open ends alternating left and rig
To top