Stamoid Light 59" 4128-00002 Black FULL ROLLS

Specifications

Specifications

Product NameStamoid Light 59" 4128-00002 Black FULL ROLLS
Part NumberSTAML59412800002
Product DescriptionStamoid Light 59" 4128-00002 Black is a high-quality, water-repellent, vinyl-coated fabric. It's powerful UV resistance protects against damage from sun exposure and it's resistance to shrinkage sets it apart from other brands in the marine fabric market.
Number Of Colors14
BrandStamoid
CautionsIf seams are sewn, those areas require seam sealer (applied to the underside, due to expected yellowing) to maintain waterproofness., You can use a 10 % bleach solution to kill mildew, but you must rinse the fabric completely with fresh water to remove any chemical residue is mandatory as residual bleach will harm the fabric., Under No Circumstances should an abrasive cleaner or any cleaner with a solvent base be used. They may remove the protective top layer of the fabric, thus quickly reducing the lifespan of the fabric.
Cleaning CodeSee Features/Cautions.
Cold CrackProduct Cold Crack is equal to or greater than -20 degrees Celsius (-4 Fahrenheit)
ConstructionWoven
Content100% Polyvinyl Chloride (PVC)
Dimensional StabilityDimensionally stable.
FeaturesPES HT 280 dtex ( Polyester) Base cloth., Extreme Light Stability: QUV Test T30-036- 2,000 hours, Extreme Use Temperature: -20 degree Celsius / + 70 degree Celsius, One-side coated with PVC, backside woven fibers encapsulated with "Nano Top", an anti-capillary invisible barrier which prevents condensation & pollutants from remaining on the underside, inhibits Mildew., Cleaning Instructions: Cleaning the fabric on a regular basis is recommended, frequency being dictated by a marina's airborne pollutants. IMAR brand Stamoid cleaning products are recommended. Mildew will not grow on Stamoid fabrics. However it will grow on the dirt left on your fabric., Stamoid Exterior Marine Fabrics should be cleaned of any dirt buildup at regular intervals (at least twice per year). It is recommended to use IMAR brand Stamoid cleaners and follow the instructions on the labels. If this is not available, a treatment of dishwashing liquid with a soft bristle brush or sponge can be applied, but will not ha
FinishWater Proof
InstructionsFabrication Tips: When using Stamoid Marine Fabrics the following is recommended. Make your pattern Exactly what you require as an end product and cut your pattern Exactly according to your pattern. Sew accurately to replicate what was on your pattern.
Mildew ResistanceProduct is Mildew Resistant.
Roll Size55 yards (50 m)
StyleSolids / Plain
Tear StrengthDIN 53.363: Warp 15 lbs, Weft: 15 lbs
Tensile StrengthEN ISO 1421: Warp: 224 lbs/2 inches, 224 lbs/2 inches.
UsesOutdoor, Boat Tops, Boat Covers
Warranty5 Year Limited Warranty
Weight8.23 ounces per square yard.
Width59" (150 cm)
To top