Mercury 61" 1 Red

Specifications

Specifications

Product NameMercury 61" 1 Red
Part NumberMERCU1
Number Of Colors14
CatalogueThis Product is on Page 35 of the J.Ennis Supply Catalogue 6th Edition.
CautionsDo not use bleach or vinegar to clean. These will degrade the fabric over time causing discoloration and shorter lifetime. Use a mild dish soap for cleaning.
Cleaning CodeMild Soap and Water.
Cold CrackProduct Cold Crack is equal to or greater than -40 degrees Celsius (-40 Fahrenheit)
CollectionIndustrial Binder Collection ,
Construction100% PVC
Content100% Polyvinyl Chloride (PVC)
FeaturesScrim is High Tenacity, Low Shrinkage Polyester. Finish is Matte., Adhesion Strength (ASTM D751 lbf/in): 25 pounds per square inch, Mullen Hydrostatic (ASTM D751-89sec34.2 psi per side): 300, Mercury also passes Fr test for Match lighting, Mercury passes Fr Test En-1176-10 Playground Equipment Surface, Mercury also passes Fr test En 1021-1 Cigarette test, Taber Abrasion (ASTM D3389-94Meth.A H-22 Wheels 1 Kg load): 800 cycles
Mildew ResistanceMildew Resistant.
Roll Size50 yards (45 m)
StyleSolids / Plain
Tear StrengthASTM D751, Warp 140Lbs, Fill 120 lbs, Passes Federal Test Method Standard 191 Textile Test Methods 191A-5134 - Warp = 140 lbs and Fill = 120 lbs.
Tensile StrengthPasses ASTM D751 - Warp = 675 lbs and Fill = 630 lbs.
ThicknessProduct thickness is .5 mm.
Thread Count17 x 18 Threads per square inch.
Weight28.80 Ounces per Linear Yard, 18.00 ounces per square yard.
Width61" (156cm)
To top