Crystal-Flex (LEXAN) 30gge

CRYST30

Specifications

Specifications

Product NameCrystal-Flex(LEXAN) 30gge 48"x 96" clear
Part NumberCRYST30
Product DescriptionCrystal-Flex(LEXAN) 30gge 48"x 96" clear is a Uncoated Polycarbonate sheet with transparent protective glazing. That can be used for windows in marine boat tops.
CautionsLEXAN resin generally is stable to water, mineral acids and organic acids. Crazing and or embrittlement may occur if a part molded from LEXAN resin is highly stressed and exposed to hot water or a moist high temperature environment. As a result, a temperature limit of 140 to 160 degrees F is recommended under these conditions.
Cleaning CodeW - Clean fabrics with water-based cleaning agents or water based foam
Construction100% PVC Plastic
Content100% Polycarbonate
ElongationElongation ASTM D-751 % (avg): Warp=67, Fill=149
FeaturesDielectric Constant ASTM D150 : at 10Hz=2.96 at 60Hz=3.17, Sheer Strength ASTM D732 : @ Yield=6,000psi @ Ultimate=10,000psi, Power Factor ASTM D150 : at 60Hz=0.0009 at 1,000,000Hz=0.010, Arc Resistance ASTM D495 : Stainless Steel Strip Electrodes=10-11 sec Tungsten Electrodes=120 sec, Flammability - Horizontal Burn (Flame Spread) AEB ASTM D635 <1 in., Heat Deflection Temperature ASTM D648:at264psi=270degF, at 66psi=280degF, Brittle Temperature ASTM D746 : -211degF, Tensile Impact Strength, S-Type Specimen ASTM 1822:225-300ft-lbs/sqin, Shear Modulus ASTM D732 : 114,000psi, Deformation Under Load @ 4000psi ASTMD621: @73degF=0.2% @158degF=0.3%, Coefficient of Thermal Expansion ASTM D696 : 3.75x10 -5 in/in/degF, Coefficient of Thermal Conductivity ASTM C177:1.35btu.in/hr.sqft.degF, Specific Heat at 40 degC : 0.30 cal/gm/degC, Compressive Strength ASTM D695 : 12,500 psi, Compressive Modulus ASTM D695 : 345,000 psi, Poisson's Ratio : 0.37, Izod Impact Strength ASTM D256A : Notched at 1/8" =,
Sheet SizeSheet Size is 48 Inches by 96 Inches
UsesWindow Products, Boat Tops

Videos

Videos

Active
To top